Hard drive detection windows 7

Follow the procedure below. Step 1: Download the hard drive storage controller drives from your motherboard manufacturer's website. Press any key. Step 2: Hit the F12 it varies depending on the manufacturer button and choose the media which has the Windows 7 setup. Note: If you are installing from a bootable USD drive, it will indicate as much. Step 6: Your drives will be listed. Select the drive by typing select disk number.

Without the braces. Internal hard disk not detected in windows 7? The methods above should help you get back on track. In case you've forgotten your Windows login password, you can easily recover it using Windows Password Key tool for both standard and administrator accounts. To make the hard drive shown in Windows Explorer you should create partition on the disk.

However, if the hard drive is suffering from partition loss issue, you should not create new partitions before lost data is recovered. On this occasion, lost partition recovery should be performed prior to any other actions. This section will show you how to restore deleted or lost partitions directly from hard drive as well as how to partition a hard disk. If partition recovery is not needed, you can move to Way 1 and Way 2 to partition the hard drive. Deleted or lost partitions cannot be restored by Disk Management, but we can use partition recovery software to get back lost volume easily.

It is highly recommended to use Eassos DiskGenius Pro to do the job for you. This partition recovery software is able to restore deleted partition back to the status before they got lost, which means files and folders in the partition will be recovered at the same time.

Once lost partitions are recovered, they can be accessed again under Windows. Let's see how recovery works:. Step 1 Install and launch Eassos DiskGenius from your computer, and then you can see all disks connected to your computer. Step 2 Select the hard drive which loses partitions and click " Partition Recovery " button from the toolbar. Step 3 Click Start button and DiskGenius starts to search for lost partitions on the selected disk area.

Step 4 Reserve or Ignore partition. Once a partition is found, you'll be prompted to make decision between Reserve and Ignore. The simple rule is to reserve the one you want to recover and ignore incorrect partitions.

How to decide whether the partition is the one you need to recover? You can easily make the choice by previewing files in the partition. DiskGenius allows to preview files in the partition it finds out, and you can view and open these files to make sure if the partition is correct. Step 5 Save lost partitions to partition table by clicking Save All button. Step 6 Select partition table style for the disk and click OK.

You can either choose partition table style on your own or follow the suggested option. If you want to create partition on hard drive in Windows Disk Management, please follow these steps:.

Step 2 The New Simple Volume Wizard will be launch and it will guide you through the process of creating a new partition on unallocated space. Step 3 In the rest steps you'll be asked to set partition size, driver letter, file system type, volume label, formatting type, etc.

You can follow suggested setting and click Next button until the partition is created successfully. Here we'll use a free Windows partition manager to do complete the task. Step 1 Launch Eassos DiskGenius from your computer. Select the hard drive that needs to be partitioned and click " Quick Partition " button. Step 2 Select partition table style, partition count, partition size, volume name, etc. Note: the option "Align Partition to Integral Multiple of Sectors" option should be selected if you want your partition to be 4K aligned.

The value next to the option can be the default setting, which satisfies the 4K alignment requirement. Step 3 Wait for a while, new partitions will be created and formatted. Without a drive letter, partition won't be displayed in Windows. If the hard drive which does not show up in Windows has been well connected to your computer and properly partitioned, you still cannot access it in File Explorer, you should make sure if it has a drive letter.

Here is how to assign a drive letter:. Step 1 Launch Disk Management, right-click on the partition which is lack of drive letter and select "Change Drive Letter and Paths" option from context menu. Then another dialog box pops up. Step 3 Select "Assign the following drive letter" option and choose a letter from the drop-down list. Then click OK and the drive letter will be added to the partition.

If your installed hard drive or other hardware does not work properly as expected, you can try this tool to check if there are any errors on the device. Step 2 Click Troubleshoot on the left pane and find the option "Hardware and Devices" on the right side. Click "Run the troubleshooter" button. Step 3 A window pops up to analyze hardware issue. Then you can follow the wizard to finish the process. The hard drive not showing up issue might be caused by corrupted or incompatible drivers, and you can update drivers manually like this:.

Step 1 Open Device Manager. Press Windows logo key and R to open Run dialog box, type devmgmt. Step 2 Expand Disk driver and locate the hard drive or external hard drive which cannot be detected by Windows. Step 3 Right-click on the disk in question and select "Update Driver Software" from context menu.

Step 4 If there are any updates, follow the instructions to update drivers. BIOS is responsible for monitoring the communication between hardware devices connected to your PC and operating system. Thus, you can enter BIOS to check status for the hard drive that cannot be recognized by system.

You can consult support team of your motherboard or computer for detailed steps to access BIOS. Besides, be careful when making changes in BIOS, as any improper operation may lead to serious problem.

If you are new to these operations, please read manual carefully in advance or ask a computer expert to help you. Step 1 Restart computer and keep pressing the function on your computer which allows you to enter BIOS. The key might by F1, F2, F3 or Delete, and it will be prompted on the screen before operating system boots.

Also, you can consult your PC's manufacturer for user manual. Step 2 Select Boot tab to check if your hard drive is listed there. Step 3 If you cannot see your hard disk, you can try enabling the controller for the disk. Exact settings for this can be found in your motherboard or PC manuals. Once the disk is turned on, restart computer and check if it can be recognized in Disk Management. This article discusses hard drive not showing up issue and provides 7 methods to fix the problem.

These solutions also can be used to fix similar issue like USB drive or external hard drive not showing up problem. If you have better solutions or any questions regarding this issue, please feel free to contact us. DiskGenius Pro All-inclusive partition manager program to safely resize partitions, recover lost files, edit hex data and back up data for PCs, laptops and workstations.